Hobre Metorex C100 – Elemental Analysis in liquids液体中元素分析仪

red

     The Metorex C100 EDXRF analyzer is for elemental analysis in liquids, from silicon (Z=14) to uranium (Z=92), from 1 ppm to 10%. The C100 analyzer uses an X-ray tube as its energy source, rather than radioactive sources. The analyzer – which has no moving parts – features integrated auto-validation on a solid reference material. The net effect is a close-to-zero-maintenance analyzer with calibration intervals of typically more than a year.     
     Metorex C100 EDXRF分析仪用于从硅（Z = 14）到铀（Z = 92）的液体中元素分析，从1 ppm到10％。 C100分析仪使用X射线管作为其能量源，而不是放射源。 分析仪 - 没有任何移动部件 - 在固体参考材料上集成自动验证功能。 最大优势是接近零维护的分析仪，其校准间隔通常超过一年。
The  technology provides the following advantages
Metorex C100有以下优势

• No high temperature conversions
• 无高温转换
• Leak detector triggering an instantaneous alarm in case of cell leaks, and alarm inputs and outputs (allowing complete shutdown in case of emergency)
• 泄漏检测器触发在电池泄漏，报警输入和输出时瞬时报警（在紧急情况下允许完全关闭）
• Wide measurement range
• 测量范围宽
• The X-ray source is an X-ray tube, meaning radiation is stopped when the power is switched off
• X射线源是一个X射线管，意味着当电源关闭时停止辐射
• Internal referencing on a solid reference material eliminates detector and electronic drift
• 在固体参考材料上的内部参考消除了检测器和电子漂移
• Optional heated sample cell for high viscosity products
• 可选的加热样品池，用于高粘度产品
• Analysis is not influenced by product density variation or C:H ratio variations
• 分析不受产品密度变化或C：H比率变化的影响
• Available for ATEX 2G (Zones 1) and 3G (Zones 2) or NEC Divisions 1 and 2
• 适用于ATEX 2G（区域1）和3G（区域2）或NEC 1和2类
• Elements from AI to U can be measured extremely accurately
• 从AI到U的元素可以非常精确地测量
• Up to four different elements can be measured at once
• 最多可以一次测量四个不同的元素
  

The Hobré Metorex C100 provides solutions for the following applications
Hobré Metorex C100 提供以下应用方案

Petroleum Refinery炼油厂
       The C100 LSXT is the most robust on-line analyzer for elemental analysis in liquids, with an element-detection range from 1 ppm(wt) to 10%. The instrument is not limited by Final Boiling Point or fatty acid methyl esters (biodiesel), and not affected by nitrogen-containing chemicals such as cetane improvers. The low background detection in combination with automatic flushing enables usage at 10ppm(wt), and results in considerably lower cost of ownership and higher availability compared with injection-conversion technologies.
       C100 LSXT是用于液体元素分析的最强大的在线分析仪，元素检测范围为1 ppm（wt）至10％。 仪器不受最终沸点或脂肪酸甲酯（生物柴油）的限制，并且不受含氮化学品如十六烷值改进剂的影响。 低背景检测结合自动冲洗能够以10ppm（wt）使用，并且与注射转化技术相比，导致显着降低的所有权成本和更高的可用性。

(Petro) Chemical Industry石油化工
       Low and high-sulfur naphtha blending in ethylene cracking feedstock
       Results can be optimized by blending lower-cost high-S naphtha with low-S naphtha. In addition to saving costs on feedstock, this method reduces CO production and extends furnace-run lengths.
       低和高硫石脑油掺混在乙烯裂化原料中
       可以通过混合低成本高硫石脑油和低硫石脑油来优化结果。 除了节省原料成本之外，该方法还减少了CO的产生并延长了炉子的长度。

Catalyst analysis催化剂分析
       In many chemical processes, measuring the concentration of the catalyst in the process stream is valuable for controlling the process. The C100-XT is designed to measure catalyst concentration in the feed, process and recovery streams. Typical applications include measuring C, Mn and Br in PIA and PTA plants.
      在许多化学过程中，测量过程流中的催化剂的浓度对于控制过程是有价值的。 C100-XT设计用于测量进料，处理和回收流中的催化剂浓度。 典型应用包括在PIA和PTA工厂测量C，Mn和Br。

Metal Plating金属电镀
      The Metorex C100 is suitable for measuring metals in galvanic baths and wastewater. Typical elements include Sn, Cr, Ni and Cu.
      Metorex C100适用于测量电镀浴和废水中的金属。 典型的元素包括Sn，Cr，Ni和Cu。

Waste Water Application废水应用
      Trace metals such as Pb, Mo and Cu can be measured.
      可以测量微量金属如Pb，Mo和Cu。