Protea atmosFIR 傅里叶红外分析仪

red

      atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems, keeping all the features that users found valuable in achieving their measurement results, but offering the benefits of the new atmosFIR platform with increased portability, lower ownership costs and increased measurement performance.
      atmosFIR can be considered a simple multi-gas analyser for combustion gas measurements; indeed for some users that is all it will be and as such it provides a cost-effective and complete measurement system. However, for the expert user atmosFIR will offer all the benefits of FTIR, with hundreds of gas measurements, multiple analytical ranges, in-depth chemometric result diagnoses and dedicated on-board sampling system.
   
       With Protea's in-house chemometrics application support and 15+ year history of emission monitoring projects, atmosFIR offers the user the complete package for their monitoring needs. With long-lifetime VCSEL reference laser diode, unique cell design, and air cooled DTGS detector with 24-bit ADC, atmosFIR is a step-change in value and service lifetime for FTIR emission gas analysis.


Specific Applications for atmosFIR:

• Stack Emission Testing
• Continuous Emission Monitoring System
• Combustion gases under WID, LCPD
• Total VOC measurement
• Speciated VOC with use of high resolution
• Carbon Bed abatement efficiency – inlet and outlet
• Ambient Air from <0.1ppm
• Fire Testing research
  

atmosFIR runs a Standard Analysis Mode with fixed acquisition parameters and chemometric analysis for common emission gases. This makes it incredibly simple to use even for users with no extensive FTIR background. Further analysis methods can be uploaded by the trained user or remotely by Protea.

Typical  measurement range(s)                        典型测量范围	0 - 10ppm; 0 - 100ppm; 0 - 10000ppm %Vol measurements can be achieved with on-board dilution MFC                                                                                %（百分量）测量可以由电路板上的稀释MFC（质量流量控制器）来实现
Typical detection limit                                        典型探测限	<0.5ppm (gas dependent)
Typical Response Time (T90, direct)        典型反应时间	150secs (1cm-1)
Standard Analysis Mode for     Combustion Gas Analysis                                应用于燃烧气体分析的标准分析模式	Hardcoded analysis for common emission gases.  No complex set-up required                                                           硬编码分析常规燃烧气体，无需复杂设置. Switch on → Zero → Measure → Report                                                                                                                         打开开关 → 调零 → 测量 → 报告
Please contact Protea for     specific gas requirements                                    特殊气体需求请联系Protea	CO    0 - 75mg/m3     NO    0 - 200mg/m3     NO2   0 - 200mg/m3     SO2   0 - 75mg/m3     HCl    0 - 15mg/m3     NH3   0 - 15mg/m3     HF     0 - 15mg/m3     HBr    0 - 50mg/m3     CH4    0 - 50mg/m3	C2H6     0 - 50mg/m3     C3H8     0 - 50mg/m3     C4H8     0 - 50mg/m3     C2H4     0 - 50mg/m3     C6H6     0 - 200mg/m3     HCHO    0 - 20mg/m3     HCN       0 - 15mg/m3     H2O       0 - 40%Vol     CO2       0 - 30%Vol
Linearity线性	<2%  range范围	Repeatability  (σ)重复性	<1%  range范围
Unlimited measurements无限制测量	Standard Analysis Mode ranges are not fixed -  increase via simple span correction Any number of additional gases can be  added via user-defined analysis                                                                                                                    标准分析模式范围不是固定的-增加通过简单的量程修正，可以通过用户定义分析添加被加上的任意数量气体.

强哥

这个公司国内有代理商吗？

red

强哥 发表于 2019-4-3 16:56
这个公司国内有代理商吗？

他们在国内有代理商公司：上海奕枫仪器设备有限公司。
联系信息如下：
上海总部：
上海市闵行区秀文路898号西子国际中心5号楼306(201199)
电话：021-54270075/76/79 传真：021-54270092
北京分公司：
北京市海淀区建材城西路87号上奥世纪中心B座626
电话：010-60609523 传真：010-60609524
武汉分公司：
武汉市洪山区八一路340号东湖楚天府9栋2914室（430070）
电话：027-87617570 传真：027-87617570-801