ExxonMobil埃克森美孚公司公司招聘分析仪工程师

red

Analyzer Engineer (Huizhou)分析仪工程师（惠州）

Location:  

Huizhou, 44, CN

Company:  ExxonMobil
Job Role Responsibilities:

• Provide analyzer engineering expertise in support of the design, construction, commissioning, start-up and operation of the ExxonMobil Huizhou Chemical Complex.
•The work includes engineering assessment, engineering design, trouble-shooting and root cause failure analysis and long-term equipment improvement initiatives.
- Provide asset support for field and online analyzer applications (chromatographic, spectroscopic, electrochemical, etc.), and physical property analyzers and sensors for process control, safety and environmental and regulatory requirements,
-Monitor and drive improvements in analyzer performance,
-Initiate and support changes in machinery technology or work practices to improve plant reliability and profitability, and
-Support reliability initiatives and programs including resolution of bad actors, management of equipment strategies, participation in (or lead) incident investigations and risk assessments, and advising on risk based work selection.
• Provide analyzer expertise to the Maintenance and Operations teams and collaborate closely with other engineering disciplines (instrumentation, applications, control systems, reliability, etc.) in support of plant operations and improvements.
• Provide engineering support for modifications to analyzer equipment and new installations, including reviewing and approving changes, developing engineering specifications/requirements, conducting or participating in design reviews, and supporting testing and commissioning.
•Support development and improvements in site procedures, practices and standards, including e.g. review of maintenance procedures/practices and remain abreast of industry standards developments (e.g., ASTM, ISA, ISO),
•Responsibilities include, but are not limited to:
-Understand the purpose and function of common analyzer infrastructure elements (e.g., sample systems, sample transport loops, shelters/racks, communication systems),
-Use statistical tools to assess analyzer performance,
-Perform analyzer engineering calculations (e.g., fast loop lag time, probe wake frequency, ventilation requirements, phase envelopes) using available engineering tools,
-Support cost estimating for analyzers and analyzer systems,
-Understand and support general analyzer maintenance work processes (e.g., planning, scheduling, PMs, performance checks),
-Understand Company controls and cybersecurity relating to analyzer systems,
-Supporting the development of equipment strategies, understanding the impact of equipment sparing, redundancy, reliability, availability, maintainability, and maintenance cost in support of Operations Excellence and Capital efficiency,
-Participating in activities related to safety, risk assessment and safety incident investigations related to analyzer equipment, and
-Support capital projects by developing project design specifications for analyzer systems, providing surveillance on contractor and vendor designs and deliverables, advise and assist analyzer testing, commissioning and start-up.

工作职责：

•提供分析仪工程专业知识，以支持埃克森美孚惠州化工园区的设计，建造，调试，启动和运行。

•工作包括工程评估，工程设计，故障排除和根本原因故障分析以及长期设备改进计划。

-为现场和在线分析仪应用（色谱，光谱，电化学等）以及用于过程控制，安全，环境和法规要求的物理性能分析仪和传感器提供资产支持，

-监控器和驱动器在分析仪性能方面的改进，

-发起并支持机械技术或工作惯例的变更，以提高工厂的可靠性和盈利能力，以及支持可靠性举措和计划，包括解决不良行为，管理设备策略，参与（或牵头）事故调查和风险评估以及就基于风险的工作选择提供建议。

•向维护和运营团队提供分析仪专业知识，并与其他工程学科（仪器，应用，控制系统，可靠性等）紧密合作，以支持工厂运营和改进。

•提供对分析仪设备和新安装的修改的工程支持，包括审查和批准变更，制定工程规范/要求，进行或参与设计审查以及支持测试和调试。

•支持现场程序，实践和标准的开发和改进，包括审查维护程序/惯例并与行业标准发展保持同步（例如ASTM，ISA，ISO），

•职责包括但不限于：

-了解通用分析仪基础设施要素（例如，样品系统，样品运输环路，掩体/机架，通信系统）的目的和功能，

-使用统计工具评估分析仪的性能，

-使用可用的工程工具执行分析仪工程计算（例如，快速环路滞后时间，探头唤醒频率，通风要求，相位包络），

-支持分析仪和分析仪系统的成本估算，

-了解并支持常规分析仪维护工作流程（例如，计划，调度，维护管理，性能检查），

-了解公司与分析仪系统有关的控制和网络安全，

-支持设备战略的制定，了解设备备用，冗余，可靠性，可用性，可维护性和维护成本的影响，以支持卓越运营和资本效率，

-参加与分析仪设备有关的安全，风险评估和安全事件调查相关的活动，以及通过制定分析仪系统的项目设计规范，对承包商和供应商的设计和交付物进行监控，为分析仪测试，调试和启动提供建议和协助，来支持基本建设项目。

Required Skills and Knowledge:

•Bachelor Degree in Chemical Engineering, Electrical / Electronic Engineering/ Instrumentation & Control Systems, Chemistry or equivalent from a recognized university.
-Knowledgeable in measurement principles for a variety of common process analyzers.
•Minimum of 5 years working experience which related to petrochemical industry.
-Knowledgeable in key chemicals processes (or refinery) and associated analyzer applications,
-Familiarity with field and online analyzer equipment from a variety of vendors (e.g. Siemens, Yokogawa, ABB),
-Knowledgeable in analyzer communication / transmission protocol and networking consideration for interface to Distributed Control Systems (DCS), and
-Familiarity with Industry standards, Country-specific regulations (CSR), and local codes.
•Knowledge, skills and experience in any of the following areas is an advantage:
-Knowledge and ability to support multivariate model based analyzer applications for unique process measurements, and familiarity with multiple open platforms (e.g., MATLAB, Pirouette) to build models.
-Understanding of product quality measurement and Quality Assurance System design and requirements.
•Experience in international projects, multi-national company (MNC), Wholly Owned Foreign Enterprise (WOFE) or JV is an advantage.
•Effective team player.
•Fluent in speaking and writing English.
•Willingness for 1-2 year’s short-term relocation, if required.

所需技能和知识：

•化学工程学学士学位，电气/电子工程/仪器与控制系统学，化学专业或获得认可大学的同等学历。

-适用于各种常见过程分析仪的测量原理。

•至少5年与石油化工相关的工作经验。

-在关键化学品工艺（或炼油厂）和相关分析仪应用程序中具有知识，

-熟悉各种供应商（例如，西门子，横河电机，ABB）的现场和在线分析仪设备，

-在分析仪通讯/传输协议和与分布式控制系统（DCS）的接口的联网方面的知识，以及熟悉行业标准，特定国家法规（CSR）和当地法规。

•具有以下任一领域的知识，技能和经验是一种优势：

-具备支持基于多元模型的分析器应用程序的知识和能力，以进行独特的过程测量，并熟悉用于构建模型的多个开放平台（例如MATLAB，Pirouette）。

-了解产品质量测量和质量保证体系的设计和要求。

•具有国际项目，跨国公司（MNC），外商独资企业（WOFE）或合资公司的经验是优势。

•有效的团队合作者。

•流利的英语读写能力。

•如有需要，安排1-2年的短期安置费。

    Job Segment: Engineer, Construction, Electrical, Quality Assurance, Instrumentation, Engineering, Technology

    职位类别：工程师，建筑，电气，质量保证，仪器仪表，工程，技术

有意者，可以扫码提交简历！