ExxonMobil埃克森美孚公司公司招聘高级仪表工程师

red

Senior Instrument Engineer (Huizhou)
高级仪表工程师（惠州）
Location:  

Huizhou, 44, CN

Company:  ExxonMobil
Job Role Responsibilities:

• Provide instrument engineering expertise in support of the design, construction, commissioning, start-up and operation of the ExxonMobil Huizhou Chemical Complex.
•The work includes engineering design, configuration, programming, maintenance, trouble-shooting, failure analysis, performance analysis in support of safe and reliable operations of instrumentation equipment within the Complex, including:
-Field instrumentation for process measurement (e.g. Pressure, Temperature, Level, Flow and Composition) as well as specialty measurements (density, vibration, IR) and control valves, shutdown valves, and their transmission systems (e.g. 4-20mA, HART, ProfiBus),
-Safety Instrumented Systems (SIS),
-Machinery controls and protection systems,
-Fire and Gas detection and protection systems,
- Programmable Logic Controllers (PLC’s) for monitoring and control of packaged systems,
-Instrumentation cabling, wiring, junction box, power supply and distribution, UPS, and associated TCP/IP, SCADA, Modbus networking (switches, routers, Ethernet, fiber optics, etc.) and transmission systems.
•Responsibilities include, but are not limited to:
-Sizing and specifying various types of instrumentation for new or existing instruments undergoing a change,
-Supporting the maintenance team and interfacing with vendors and contractors to maintain, troubleshoot, repair/replace, configure/tune/program, test/commission/de-commission, etc.,
-Support development of equipment strategies, understanding the impact of equipment sparing, redundancy, reliability, availability, maintainability, and maintenance cost in support of operations excellence and capital efficiency, and
- Participating in activities related to safety and risk assessment and in safety incident investigations related to instrumentation equipment.
• Primary contributions as both individual contributor and work-group Lead:
-Apply broad technical and business skills and expertise to solve more complex problems,
-Develop / implement innovative solutions to non-routine problems by leading teams in resolving technical challenges and expanding sphere of influence beyond core technical discipline,
- Provide work direction to a group of 3-5 contact engineers,

- Provide technical leadership, quality assurance and manage interfaces to other disciplines,
-Mentor less experienced engineers to develop skills, and
- Provide technical leadership (formal or informal) in operations and small local projects.
•Demonstrate capability to influence without direct authority.
•Utilize depth and/or breadth of experience to identify cross-functional business opportunities and participate in internal company networks to share knowledge and practices to the benefit of others.
•Work effectively with partners and contractors in pursuit of efforts on the projects and assets they support.
• Participate in industry conferences that align with the individual's skills and business focus.

工作职责：

•提供仪器工程专业知识，以支持埃克森美孚惠州化工园区的设计，建造，调试，启动和运行。

•工作包括工程设计，配置，编程，维护，故障排除，故障分析，性能分析，以支持园区内仪器设备的安全可靠运行，包括：

-用于过程测量（例如压力，温度，液位，流量和成分）以及专用测量（密度，振动，IR）和控制阀，截止阀及其传输系统（例如4-20mA，HART，ProfiBus）的现场仪表）

-安全仪表系统（SIS），

-机械控制和保护系统，

-火灾和气体探测和防护系统，

-可编程逻辑控制器（PLC），用于监视和控制打包的系统，

-仪器电缆，接线，接线盒，电源和配电，UPS以及相关的TCP / IP，SCADA，Modbus网络（交换机，路由器，以太网，光纤等）和传输系统。

•职责包括但不限于：

-为变更中的新的或现有的仪器确定尺寸并指定各种类型的仪器，

-支持维护团队并与供应商和承包商进行交互，以进行维护，故障排除，维修/更换，配置/调整/编程，测试/调试/停用等，

-支持设备战略的制定，了解设备备用，冗余，可靠性，可用性，可维护性和维护成本的影响，以支持卓越运营和资本效率，以及

-参加与安全和风险评估有关的活动以及与仪表设备有关的安全事故调查。

•作为个人贡献者和工作组负责人的主要贡献：

-运用广泛的技术和商业技能以及专业知识来解决更复杂的问题，

-由领导团队开发/实施非常规问题的创新解决方案，以解决技术难题并将影响范围扩大到核心技术领域之外，向3-5个联络工程师小组提供工作指导，

-提供技术领导，质量保证并管理与其他学科的接口，

-缺少经验丰富的工程师来发展技能，以及

-在运营和小型本地项目中提供技术领导（正式或非正式）。

•展示没有直接授权的影响力。

•利用经验的深度和/或广度来确定跨职能的商机，并参与公司内部网络以共享知识和实践，从而造福他人。

•与合作伙伴和承包商有效地合作，努力对其所支持的项目和资产进行努力。

•参加符合个人技能和业务重点的行业会议

Required Skills and Knowledge:

•Bachelor’s degree or above in Electrical / Electronic Engineering, Instrumentation & Control Systems or equivalent
•Minimum of 10 years working experience related to petrochemical industry or design institute.
-Experience in Design, Construction, Pre-commissioning, Commissioning and Start-up of process units is an advantage,
-Demonstrated experience with Instrumentation and Control (I&C) requirements and design principles and knowledge of field measurement and control devices and their proper application,
-Proficient in troubleshooting, performance analysis and solving field problems with a broad spectrum of measurement and control devices,
-Strong working knowledge and experience in equipment engineering specifications and standards, including Industry standards, Country-specific regulations (CSR) and local codes,
-Demonstrated capability to maintain and support safety system hardware, software architecture, and transmission systems and familiarity with SIS software and hardware platforms from major vendors (Schneider-Electric, Honeywell, HIMA, etc.),
-Knowledge of safety in design principles, ability to contribute to HAZOPs and Risk Assessments, SIL assignment and evaluation processes and knowledge and proper use of Hazardous Area codes to be able to classify areas and specify appropriate equipment,
-Familiarity with DCS software and hardware platforms from major vendors (Honeywell, Yokogawa, Emerson, etc.) or equivalent,
-Knowledge of fire and gas detection technology, systems, and implementation,
-Familiarity with SmartPlant Instrumentation (SPI) software or equivalent,
-Skills necessary to manage in-house and contract engineering scope for large capital project,
-Skills necessary to design, implement, troubleshoot and maintain data connections from DCS/SCADA systems to business, instrument, analyzer and other subsystem/peer system networks,
-Knowledge of Package Systems function, interface methods and specification development and skills necessary to configure host networking parameters and network devices for system interconnection and ability to troubleshoot networked systems,
-Skilled in equipment strategy development including risk assessment facilitation and evaluation of task cost effectiveness, communicating equipment strategy results and obtaining approval of completed equipment strategies.
•Knowledge, skills and experience in any of the following areas is an advantage:
-Knowledge of Industrial Control Systems Environment (ICSE) security design, implementation and on-going management, and
-Skilled in understanding and interfacing with all types of control and monitoring systems associated with machinery and with fired equipment.
•Experience in international projects, multi-national company (MNC), Wholly Owned Foreign Enterprise (WOFE) or JV is an advantage.
•Effective team player.
•Fluent in speaking and writing English.
•Willingness for 1-2 year’s short-term relocation, if required.

所需技能和知识：

•电气/电子工程，仪表与控制系统专业本科以上学历

•至少有10年与石油化工或设计院相关的工作经验。

-具有处理单元的设计，建造，调试，调试和启动方面的经验是优势，

-具有仪表和控制（I＆C）要求和设计原理的经验，以及现场测量和控制设备及其正确应用的知识，

-精通各种测量和控制设备的故障排除，性能分析和解决现场问题，

-在设备工程规范和标准方面具有丰富的工作知识和经验，包括行业标准，特定国家/地区法规（CSR）和当地法规，

-具备维护和支持安全系统硬件，软件体系结构和传输系统的能力，并熟悉主要供应商（Schneider-Electric，Honeywell，HIMA等）的SIS软件和硬件平台，具备以下方面的安全知识：设计原则，对HAZOP和风险评估做出贡献的能力，SIL的分配和评估过程以及对危险区域代码的了解和正确使用，以便能够对区域进行分类并指定适当的设备，

-熟悉主要供应商（Honeywell，Yokogawa，Emerson等）或同等产品的DCS软件和硬件平台，

-火灾和气体检测技术，系统和实施的知识；

-熟悉SmartPlant Instrumentation（SPI）软件或类似软件，

-管理大型资本项目的内部和合同工程范围所需的技能，

-设计，实施，故障排除和维护从DCS / SCADA系统到业务，仪器，分析仪和其他子系统/对等系统网络的数据连接所必需的技能，

-软件包系统的功能，接口方法和规范开发的知识，以及配置主机联网参数和网络设备以进行系统互连所需的技能以及对联网系统进行故障排除的能力，熟练掌握设备策略，包括风险评估的简化和任务成本效益的评估，沟通设备策略的结果以及获得已完成设备策略的批准。

•具有以下任一领域的知识，技能和经验是一种优势：

-了解工业控制系统环境（ICSE）的安全设计，实施和持续管理，以及

-熟练掌握与机械和燃烧设备有关的所有类型的控制和监视系统并与之交互。

•具有国际项目，跨国公司（MNC），外商独资企业（WOFE）或合资公司的经验是优势。

•有效的团队合作者。

•流利的英语读写能力。

•如有需要，安排1-2年的短期安置费

   Job Segment: Engineer, Electrical, Construction, Instrumentation, Testing, Engineering, Technology

   职位类别：工程师，电气，建筑，仪器仪表，测试，工程，技术

有意者扫码提交简历