Horiba 堀场MEXA-ONE-FT 系列汽车尾气监测系统
本帖最后由 red 于 2016-9-2 11:52 编辑Simultaneous Measurement of Multiple Components for the Emission Regulations适用于多组分同时测量排放标准
The MEXA-ONE-FT Series simultaneously measures concentrations of several constituents including NH3, N2O, CH4,CO and CO2 in un-diluted exhaust gas using the Fourier transform infrared (FTIR) method in combination with a multivariate analysis algorithm. It incorporates HORIBA's proprietary, compact interferometer which yields superior performance and high accuracy. In addition, usability, expandability and flexibility are realized by “HORIBA ONE PLATFORM”.The system complies with NH3 testing requirements of Euro VI, the EU regulation for heavy duty emissions testing. MEXA-ONE-FT系列可以多组分同时测量未稀释的尾气的几个组分包括NH3，N2O,CH4，CO和CO2，利用傅里叶变换红外（FTIR）方法结合多变量分析算法。它集合了Horiba专业，紧凑，精度高特点。另外，在“HORIBA ONE PLATFORM”上轻松体现出它的易用性，可扩展性和灵活性。该系统符合欧VI，欧规重型排放检测的NH3测试要求。
Applications应用
1.Euro VI compliance "MEXA-ONE-FT-E"
欧VI合规"MEXA-ONE-FT-E"NH3 response time (t10-90) : 5 seconds or lessNH3反应时间（t10-90）：5秒或更少
Sampling temperature : 191°C样气温度：191℃
2.Simultaneous and continuous measurement of up to 28 components such as NO, NO2, N2O, NH3同时连续测量组分高达28种，诸如NO,NO2，N2O,NH3.
[*]Research of alcohol fuel
[*]醇醚燃料的研究
[*]Development of after-treatment systems
[*]后处理系统的发展
[*]Measurement of greenhouse gas
[*]温室气体的测量
3.Tools for certification tests and R&D
认证测试和研究工具
Combined with the MEXA-ONE series, which is used for emission certification test, the MEXA-ONE-FT simultaneously measures NH3 along with various regulated and unregulated components. Options for THC and O2 measurement are available. 与MEXA-ONE系列结合起来，用于排放认证测试，MEXA-ONE-FT 同时测量NH3以及管制和无管制的组分。对于THC和O2测量也是可选的。
Integrated Operating Platform集成化的操作平台http://www.horiba.com/uploads/RTEmagicC_ONE_PLATFORM.jpg.jpg
The HORIBA ONE Series of measurement devices employs the common software platform HORIBA ONE PLATFORM which integrates the test devices in an emission laboratory into a single user interface, increasing efficiency and optimizing user control over the entire testing process.Horiba One系列测量设备采用了通用的软件平台HORIBA ONE PLATFORM，它把一个排放实验室里的测试设备集成在一个独立的用户界面，可以提高工作效率和优化用户控制整个测试过程。
規格
Outline
ModelStandard type : MEXA-ONE-FT
Euro VI compliance type : MEXA-ONE-FT-E
Conformed standardsCE, FCC, KC
Target components and ranges*1Maximum 28 components
Standard component set: for gasoline/diesel vehicle (18 components and “NO+NO2”)
Optional component set: for CNG-fueled vehicle (16 components and “NO+NO2”)
ApplicationsEmissions performance tests of various engines & evaluation of diesel NOx after-treatment system
PrincipleFourier transform infrared spectroscopy (FTIR)
Outputs / InputsMonitoring on 17-inch LCD
Sample line temperatureMEXA-ONE-FT : 113 ± 6oC
MEXA-ONE-FT-E : 191 ± 6oC
Sample gas flow rateMEXA-ONE-FT : 4.0 ± 0.5 L/min
MEXA-ONE-FT-E : 14 ± 1 L/min
Operating environmentAmbient temperature : 15 to 35oC
Ambient humidity : less than 80% relative humidity
System Configuration
Liquid nitrogenReplenishing amount: approx. 500 ml (including evaporation)
Duration: 10 hours or more (The dewar vacuum must be renewed annually)
Power supply voltageAny of the following voltage and frequency (to be specified when ordering)
・ 100 ± 10 V AC, 50/60 ± 1 Hz, single phase
・ 110 ± 11 V AC, 50/60 ± 1 Hz, single phase
・ 115 ± 11.5 V AC, 50/60 ± 1 Hz, single phase
・ 120 ± 12 V AC, 60 ± 1 Hz, single phase
・ 200 ± 20 V AC, 50/60 ± 1 Hz, single phase
・ 220 ± 22 V AC, 50 ± 1 Hz, single phase
・ 230 (207～250) V AC, 50 ± 1 Hz, single phase
・ 240 (216～250) V AC, 50 ± 1 Hz, single phase
Power requirementsApprox. 4.0 kVA as maximum, approx. 3.0 kVA at stable state
Dimensions655 (W) x 855 (D) x 1970 (H) mm
(excluding protruding objects)
MassApprox. 460 kg
Performance
Zero noise*2Less than 1.0% of full scale
(depending on measurement components)
Response time*3
(t10-90)MEXA-ONE-FT : 5 seconds or less when
switching from N2 to 200 ppm CO.
MEXA-ONE-FT-E : 5 seconds or less
when switching from N2 to 200 ppm NH3
Repeatability *4 *5Within ±1.0% of full scale
Zero drift/span drift*4 *5Within ±1.0% of full scale/8 hours
Warm-up timeLess than 2 hours after turning on
the main power
Options
Sample line selector8 lines
Analog output boardAnalog output: 0-10V Max. 16 channels
(Output components are selectable)
A connection cable (Max. 15m)
Host communication cableLAN cable
NH3 filter elementSilica fiber (φ19.6 mm x L90 mm)
THC measurementPrinciple : Heated flame ionization detection (HFID)
Measurement range : from 0-10 ppmC to 0-60000 ppmC
O2 measurementPrinciple : Magnetopneumatic Detector (MPD) Measurement range : from 0-1 vol% to 0-25 vol%
Automatic replenishing device for liquid nitrogenMaximum storage amount : Approx. 12 L
Duration : 120 hours or more
(depending on the vacuum degree of dewar)
For more details, please contact HORIBA
*1 : To be specified when ordering.
*2 : The zero noise is defined as the standard deviation of the concentration reading multiplied by 2.
*3 : Using a sample Probe (0.3 m), a heating filter and a heating pipe (10 m) without obvious dirt in a sample line.
*4 : Confirmed with 200 ppm CO, 500 ppm CH4 and 200 ppm C2H6.
*5 : Span gas with more than 80% of the full scale concentration shall be used.
页:
[1]